Part Number Hot Search : 
W78C354 YB1509 28F800F3 S22MD2 D23C1 A0100 BCY59IX M74ALS1
Product Description
Full Text Search
 

To Download AM-5416 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Ordering number : ENA0056
AM-5416
Package Dimensions (unit : mm)
Overcoat Side
(2.5)
Light Receiving Side Glass Juts(4 Corners) Width : 1.0MAX, Length : 15.0MAX
(1.2) (18.35)
100
5
Lead Wires
100 A
5
B
Wire Overcoat
(8)
60.1
0.5
52.0
0.2
(4.1)
Note: Glass Substrate Thickness Module Thickness Wire-Overcoat Thickness Standard lead wires length
Ratings at Ta = 25C
Parameter Open Circuit Voltage Short Circuit Current Operating Voltage & Operating Current Operating Temperature Storage Temperature
: 1.8mm : 2.3mm max : 3.3mm max (Including Module) : 100mm Marking ( A & B )
Effective Area
Symbol Voc Isc Iope Topr Tstg SS 50kLx SS 50kLx
Conditions min
Ratings typ 3.1 22.9 17.4 49.9 -5 to +40 -20 to +70 max
Unit V mA mA mA C C
SS 50kLx, Vope=2.0V AM-1.5, 100mW/cm2, Vope=2.0V
SS: Solar Simulator
Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before using any SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein.
90606 / D1505HKIM No.A0056-1/2
Effective Area
(15)
0.5
36.7
34.3
0.2
AM-5416
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of December, 2005. Specifications and information herein are subject to change without notice. PS No.A0056-2/2


▲Up To Search▲   

 
Price & Availability of AM-5416

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X